README

Rpi chooses modules, locations and parameters for wires.
space seperated values

Link to the manual -https://docs.google.com/document/d/1h8VP7N_FWcMYxiyH7pzzA1065ZJ98JLBcauPc3oHvbI/edit?usp=sharing

BOOT SEQUENCE

BOOT - Sent from module. Parameter - module ID
DATA - Sent from Rpi to module. Parameters - free according to specific logic per module.
READY - Sent from module after all parameters are set correctly.
UNREADY - Sent from module. When module READY fails.
START - Sent from Rpi to start.
ACK - Response for START. 

PERIODIC

TIME - Sent from rpi each ten seconds; Parameter - time in 10s resolution.

SOLUTION

BOOM - sent from rpi if bomb exploded.
TRIGGER - Sent from module if triggered.
PENALTY - Sent from module if penalty is assessed. Rpi decides penalty time.
SOLVED - Sent from module after it is solved correctly. No parameter

GENERAL 
PING - Sent from Rpi/module. No parameter


MODULE SPECIFIC PROTOCOL

Big Red Button - 
Data neeeded - whether all other modules have been solved.
Format - ALL_SOLVED:STATUS, where STATUS = 0 (not all other modules have been solved), 1 (otherwise).

Wires - 
Data needed - wire locations (for each wire - color and if present), bomb state (According to defusal manual).
Format - 
	Wire locations - ROW_DATA:C1,C2,C3,C4,C5. Where Ci is letter representing color with the following options
	Y - Yellow
	R - Red
	W - White
	B - Black
	G - Green
	E - Empty

	Wire locations need to be sent BEFORE Bomb state

	Bomb state - SETUP_DATA:STATE_ID. ID is by manual in increasing order according to tables.